Lianyungang HUADE Petrochemical Machinery Co., Ltd.
  • 
  • Home
  • About Us+
    • Company Profile
    • Quality Control
  • Products+
    • Land Loading Arms
      1. Top Loading Arms
      2. Bottom Loading Arms
      3. LNG/Cryogenic Loading Arms
      4. PTFE Lined Loading Arm
      5. Heated Loading Arm
      6. Automatic Loading Arm
    • Marine Loading Arms
      1. Marine Loading Arm (Hydraulic Operation)
      2. Marine Loading Arm (With Vapor Line)
      3. Marine Loading Arm (Manual Operation)
    • Loading Skids
      1. Top Loading Skid
      2. Bottom Loading Skid
      3. LNG Loading Skid
    • Loading Racks
      1. Single Station Loading Rack
      2. Multi-Station Loading Racks
    • Folding Stairs
    • Gangways
      1. Column Type Gangway
      2. Tower Type Gangway
    • Floating Suction Unit
    • Quick Release Hook
      1. Manual Quick Release Hook
      2. Electric Quick Release Hook
    • Internal Floating Roof
  • Services
  • Projects
  • Downloads
  • Videos
  • Contact Us
  • Home
  • Products
  • Loading Skids
  • LNG Loading Skid
LNG Loading Skid
Inquiry

LNG Loading Skid

LNG loading skid is a cryogenic loading and metering system that integrates the control system and cryogenic instruments into a movable skid frame according to the loading method. The instruments used in the loading skid are selected based on the properties of LNG.

Specifications
 Types
Liquid Pipeline
Gas Pipeline
Operating temperature -196~50℃ -196~50℃
Design temperature -196~60℃ -196~60℃
Operating pressure 0.55MPa 0.1~0.55MPa
Design pressure 0.88MPa 0.78MPa
Design flow rate 60m³/h 200m³/h
Medium LNG LNG
Nominal diameter 2~3’’ 2~3’’
  • Plant instrument air: 0.5~0.7MPa (Plant gas supply of 0.6 MPa)
  • Nitrogen purging: 0.4~0.8MPa (Plant gas supply of 0.7 MPa)
  • Hazardous area: ZONE1
  • Explosion proof: ExdII BT4 or higher
  • Protection: IP65 or lower
Main functions
  • Batch control: The LNG batch controller installed on the skid is activated upon receiving an order to begin loading. It follows a predetermined protocol that opens the valves and tracks the flow rate via a flowmeter. When the designated loading capacity is reached, the procedure is completed by closing the valves.
  • Pre-cool tank: In order to load LNG safely, tank cars arriving at the loading station must be pre-cooled. This is done by spraying with low flow rate at the top, reducing the temperature in the tank through LNG gasification. Once the temperature in the tank has been lowered to around -100 degrees, full flow bottom loading can begin.
  • Flow control: A flow control valve and mass flowmeter are installed on the loading skid to ensure the loading process is carried out smoothly and safely. The valve and meter work together to effectively regulate the flow rate.
  • Nitrogen purging: Nitrogen purging is enabled by three nitrogen regulating valves fitted on the loading skid. These valves are used for nitrogen purging of the loading arm both before and after loading, as well as creating a nitrogen seal on the rotary joint, and for detection of any potential leaks.
  • Temperature and pressure alarm: This control system is designed with pressure and temperature transmitters installed on the LNG and RG pipelines of the loading skid in order to monitor temperature and pressure during loading. If their values exceed the predetermined limit, an alarm will sound to alert the necessary personnel.
  • Safe release of pressure: In an emergency, safety valves installed on the liquid, gas, and nitrogen pipeline of the loading skid act to regulate pressure in order to protect equipment and instruments within the skid. If the pressure exceeds the design limit, these safety valves will activate and ensure the safety of the system.
Features
  • Every pipeline can be configured with automatic control valve to achieve automatic control of each loading operation by coupling with batch controller, (e.g. leakage detection → purging → pre-cooling → small flow transferring → mass transferring →purging) achieving one-key loading operation;
  • The batch controller is equipped with IC card reader and keyboard, as well as display screen which indicates the status of valves and loading operation and guides operators to complete the operation step-by-step;
  • All pipes, valves, instruments and electrical components are integrated in a base frame, and processes including assembling, welding, flaw detection, testing, and joint debugging of electrical components and control system are completed before leaving the plant; when used on site, operator only need to connect flanges and cables, greatly reducing the field installation and commissioning time;
Inquiry

HUADE has focused on designing and producing fluid loading arms for the transfer of liquids and gases since its inception in 1991. As an experienced loading arm manufacturer, we believe that safety and efficiency are the two most important criteria which ultimately matters to our customers. All of our liquid loading systems and fluid handling equipment are manufactured to international standards, and tailored to different application needs. Regardless of marine, road and railway liquid transfer systems, our engineers always strive for continuous innovation, development and improvement for the satisfaction of our customers in chemical, petrochemical, pharmaceutical, beverage, and other industries.

Other Products
    1. Single Station Loading Rack
    2. Single Station Loading Rack
    1. Multi-Station Loading Racks
    2. Multi-Station Loading Racks
    1. Tower Gangways
    2. Gangways
    1. Folding Stairs
    2. Folding Stairs
Product List
  • Land Loading Arms
  • Marine Loading Arms
  • Loading Skids
    1. Top Loading Skid
    2. Bottom Loading Skid
    3. LNG Loading Skid
  • Loading Racks
  • Folding Stairs
  • Gangways
  • Floating Suction Unit
  • Quick Release Hook
  • Internal Floating Roof
Contact Us
  • No.117, Qufeng Rd., Haizhou Development Zone, Lianyungang City, Jiangsu Province, China
  • info@huade-loadingarm.com
  • +86-518-83087372 +86-518-86097927
  • +86-18795550130
Quick Links
  • About Us
  • Services
  • Projects
  • Downloads
  • Videos
  • Review
Products
  • Land Loading Arms
  • Marine Loading Arms
  • Loading Skids
  • Loading Racks
  • Folding Stairs
  • Gangways
  • Floating Suction Unit
  • Quick Release Hook
  • Internal Floating Roof
Supported by ETW International Inc. USA
Tags: custom loading skid, LNG bunkering equipment, custody transfer system, industrial liquid handling equipment